What is the difference between black powder and white powder?

In conclusion, the decision between black and white DTF powder relies on the application and cloth color. Black DTF powder is good in preventing sublimation on dark-colored textiles, whereas white DTF powder is adaptable and suited for any fabric color. Both have pros and cons, so the choice should be made based on what the person wants and need

How do you fix a Sublimation printer that won't feed DTF film?

For the feeding problem , you can take a piece of copier paper and attach it to the DTF sheet using painter's tape, and It will feeds through great!

How to use Heat Press curing the A-SUB DTF POWDER

To cure the DTF film using a heat press, follow these steps: Set the Heat Press Temperature: Preheat your heat press to 320-330°F (160-165°C). Adjust the Pressure: Use medium pressure to avoid smudging the powder. Place the DTF Film: Lay the printed film with the adhesive powder side up on the lower platen. Hovering Method: Instead of pressing down, hover the heat press plate about 1-2 inches above the film. This allows the heat to cure the powder evenly without flattening the design. Curing Time: Allow the powder to cure for approximately 2-3 minutes or until it turns shiny and smooth. Check the Curing: The powder should be fully melted and glossy but not overcooked.

A-SUB DTF Powder Melting Time

The recommended temperature for curing DTF powder is 320°F (160°C). The curing time typically ranges from 2 to 3 minutes, but it’s important to monitor the powder. It should appear smooth and fully melted without any grainy texture when it’s ready.

Why need A-SUB DTF Powder

After printing your design on a DTF transfer film, the powder is applied to the wet ink. It melts when heated, creating a strong bond between the transfer and the fabric during heat pressing.

Is the safe for A-SUB DTF Film

A-SUB DTF powder is non-toxic and SGS certified. However, we still recommend wearing a mask and gloves to avoid any potential discomfort. Additionally, working in a well-ventilated area is advisable for safety.😊 if you need some document , please contact us

Can i use A-SUB DTF Film with sublimation ink or regular ink

if you are using sublimation ink or regular ink , recommend use on light fabric, if you want to do it on dark fabric, please choose the DTF printer with dtf ink

A-SUB | Direct to Film (DTF) for any fabric

Collection: A-SUB DTF Series

A-SUB DTF Fine-Medium DTF Powder Adhesive 2.2lbs (White)

A-SUB DTF Fine-Medium DTF Powder Adhesive 2.2lbs (Black)

A-SUB DTF Starter Kit for A3 DTF Printers – 13" x 32.8ft Double-Sided Matte Film and 2.2lbs White DTF Powder

About A-SUB

Products

Service center

Support

Follow us